Lanier 5635 ユーザーズマニュアル

Service and Supplies

9 - 25

Copies appear dirty.

The image density is set too 

dark

Adjust the image density.

Auto Image Density is not 

selected.

Select Auto Image Density.

The reverse side of an original 

image is copied.

The image density is set too 

dark.

Adjust the image density.

Auto Image Density is not 

selected.

Select Auto Image Density.

A shadow appears on copies if 

you use pasted originals.

The image density is too dark.

Adjust the image density.

Change the direction of the 

originals.

Put tape on the pasted part.

The same copy area is dirty 

whenever making copies.

The exposure glass or document 

feeder is dirty.

Clean them.

Copies are too light.

The image density is set too 

high.

Adjust the image density.

The paper size is not 

appropriate.

Use the recommended paper.

Toner cartridge is almost empty. ADD TONER.

Parts of the image is not copied. The original is not set correctly.

Set the orignal correctly.

An improper paper size is 

selected.

Select proper paper size.

Copies are blank.

The original is not set properly.

When using the exposure glass, 

set the originals face down. 

When using the document 

feeder, set the originals face 

down.

A watery or wavy pattern is 

produced on copies.

Your original has a dot pattern 

image or many lines.

Place the original on the 

exposure glass at a slight angle.