Fujitsu fi-4530C ユーザーズマニュアル

fi-4530C Image Scanner Getting Started

 

3

1. Place the scanner at its installation site.

For details on the scanner's dimensions and 
required installation space, refer to "fi-4530C 
Operator’s Guide" "7.2 Installation Specifica-
tions" on the Setup CD-ROM.

2. Attach the ADF paper chute.

Hold the ADF paper chute and insert its tabs into 
the holes on the rear side of the scanner as shown 
in the figure below so that the side guides face up.

3. Connect the AC adapter.

1) Connect the AC cable to the AC adapter.

2) Connect the connector of AC adapter to the DC 

inlet of the scanner.

3) Insert the AC cable into the power outlet.

When running Windows 95 or Windows NT 4.0, con-
nect the scanner to your PC by the SCSI cable.
When running Windows 98, Windows Me, Windows 
2000, or Windows XP, connect the scanner to your PC 
by either the USB interface cable or the SCSI cable.

■ Connecting the USB Interface 

1. Connect the USB interface cable to the USB 

interface connector of the scanner.

ATTENTION

Use only the AC adapter provided by 
the manufacturer.

ADF paper chute

Tab

Side guide

ATTENTION

Do not connect both the USB interface 
cable and the SCSI cable at the same time. 
It is not possible to use the USB interface  
with Windows 95 and Winows NT 4.0.