Fujitsu fi-4530C ユーザーズマニュアル

2

.

*) About the settings on the launcher, refer to FUJITSU 

TWAIN32 scanner driver help and the "fi-4530C 
Operator’s Guide" on the Setup CD-ROM.

■ Indications on the Function No. 

The following shows the indications on the Function 
No. display.

z

8

Blinks only one time upon turning on the scanner.

z

P

Indicates that the scanner has been turned ON and 
is being initialized.

z

0

Indicates that initialization will soon be completed.

z

1

Indicates that initialization has been completed 
successfully.
This status is called "Ready Status". 

z

U

Indicates that a temporary error (that users can 
solve) has occurred during the initialization or 
scanning of documents.
"U" and an error number (1, 2, 6) are displayed 
alternately.
To return the scanner to the ready status ("1"), 
press the "Scan" or "Send to" button while the error 
is indicated.

z

E

Indicates that a device alarm (that users can not 
solve) has occurred during the initialization or 
scanning of documents.
"E" and an alarm number (2 to 9, and A, c, d, F) are 
indicated alternately.
To return the scanner to the ready status ("1"), 
press "Scan" or "Send to" button while the alarm is 
indicated.
If this alarm occurs, turn the power off and then on 
again. If the alarm is indicated after turning on the 
power again, contact your service engineer.

Function No. display

Indicates the function No. and 
error status. 

But-
tons

Function

Changes the Function activated 
by the Send to button (*).

Send to

Launches the linked application 
software (*).

Scan
Power button

Turns the scanner ON and OFF.

LED

-

Lights when the scanner is 
turned ON.