Frigidaire 137153100a (0903) ユーザーズマニュアル

ページ / 12
Important Safety Instructions
Recognize safety symbols, words and labels
Safety items throughout this manual are labeled with a 
WARNING or CAUTION based on the risk type as described:
Destroy the carton and plastic bags after the dryer is un-
• 
packed. Children might use them for play. Cartons covered 
with rugs, bedspreads, or plastic sheets can become airtight 
chambers causing suffocation. Place all materials in a gar-
bage container or make materials inaccessible to children.
The electrical service to the washer must conform with local 
• 
codes and ordinances and the latest edition of the National 
Electrical Code, ANSI/NFPA 70, or in Canada, CSA 22.1 
Canadian Electrical Code Part 1.
To avoid back or other injury, have more than one person 
• 
move or lift the washer.
The instructions in this manual and all other literature in-
• 
cluded with this dryer are not meant to cover every possible 
condition and situation that may occur. Good safe practice 
and caution MUST be applied when installing, operating 
and maintaining any appliance.
Save these instructions
for future reference.
This symbol alerts you to situations that 
may cause serious body harm, death or 
property damage.
This symbol alerts you to situations that may 
cause bodily injury or property damage.
 For your safety the information in this manual must be followed to minimize the risk of fi re or explosion or to 
prevent property damage, personal injury or loss of life. Do not store or use gasoline or other fl ammable vapors and liquids in 
the vicinity of this or any other appliance.
2
Important Safety Instructions ................................................2
Installation Requirements .................................................. 2-3
Installed Dimensions .............................................................4
Unpacking Instructions ..........................................................4
Installation Instructions ..................................................... 5-6
Replacement parts ................................................................6
Français ................................................................................7
Tools needed for installation:
3/8” socket and ratchet
• 
Adjustable pliers
• 
Carpenter’s level
• 
Table of Contents
CIRCUIT - Individual, properly polarized and grounded 15 
amp. branch circuit fused with 15 amp. time delay fuse or 
circuit breaker.
POWER SUPPLY - 2-wire, with ground, 120 volt single phase, 
60 Hz, Alternating Current.
OUTLET RECEPTACLE - Properly grounded 3-prong receptacle 
to be located so the power supply cord is accessible when 
the washer is in an installed position.
 Because of potentially inconsistent voltage capabili-
ties, the use of this washer with power created by gas pow-
ered generators, solar powered generators, wind powered 
generators or any other generator other than the local utility 
company is not recommended.
 GFI (Ground Fault Interrupter) receptacle is not re-
quired.
  Read all of the following instructions before 
installing and using this appliance:
type
type
Grounding
Grounding
receptacle
receptacle
wa
wall
ll
Po
Power cord
wer cord
with 3-prong 
with 3-prong 
gr
grounded plug
ounded plug
Do not, under any circumstances,
Do not, under any circumstances,
cut, remove, or bypass the
cut, remove, or bypass the
grounding prong.
grounding prong.
The washer MUST be grounded. In the event of malfunction 
1. 
or breakdown, grounding will reduce the risk of electrical 
shock by a path of least resistance for electrical current.
Since your washer is equipped with a power supply cord 
2. 
having an equipment-grounding conductor and a grounding 
plug, the plug MUST be plugged into an appropriate, 
copper wired receptacle that is properly installed and 
grounded in accordance with all local codes and ordinances 
or in the absence of local codes, with the National Electrical 
Codes, ANSI/NFPA 70 (latest edition). If in doubt, call a 
licensed electrician. DO NOT cut off or alter the grounding 
prong on the power supply cord. In situations where a 
two-slot receptacle is present, it is the owner’s responsibility 
to have a licensed electrician replace it with a properly 
grounded three prong grounding type receptacle.
Electrical system requirements
Grounding requirements
 - ELECTRICAL SHOCK HAZARD - Improper 
connection of the equipment grounding conductor can result 
in a risk of electrical shock. Check with a licensed electrician 
if you are in doubt as to whether the appliance is properly 
grounded.
Installation Requirements