Chevrolet impala 2000 ユーザーズマニュアル

A. Rear Sidemarker Lamp

B. Tail/Stop/Turn Signal Lamp

To remove the rear lamp assembly:

1. Open the trunk. Remove the convenience net if you

have one. Unhook the net from the upper wing nut.

2. Remove the upper

(convenience net) wing
nut, if equipped.

3. Pull the carpet away from the rear of the vehicle.

4. Unscrew the two remaining wing nuts.

5. Pull the assembly from the body carefully.

6. To remove the socket, turn the socket

counterclockwise and pull it out.

7. Pull the bulb out. Do not twist it.

8. Push the new bulb into the socket.

9. Replace the socket in the assembly. Tighten the

socket by turning it clockwise.