Chevrolet impala 2000 ユーザーズマニュアル

10. Install the assembly and the two lower wing nuts.

11. Reinstall the carpeting.

12. Reinstall the upper (convenience net) wing nut 

and convenience net, if equipped.

1. Open the trunk. The back

-

up lamp bulbs are in 

the rear of the trunk lid.

2. Remove the nine wing nuts.

3. Pull the rear applique away from the vehicle.

4. To remove a socket press the tab, turn the socket

counterclockwise and pull it out.

5. Pull the bulb out. Do not twist it.

6. Push the new bulb into the socket.

7. Reinstall the socket in the assembly. Tighten the

socket by turning it clockwise.

8. Reinstall the applique and the nine wing nuts.

1. Remove the two access covers from the assist handle

assembly using a small coin.

2. Remove the old bulb from the small prongs

extending from the dome lamp base plate; hook the
new bulb onto the prongs.

3. Remove the two screws with a E8 TORX

R

 socket.

4. Pull the assist handle assembly out and remove 

the old bulb.

5. Reverse Steps 1 through 3 to reassemble.