Zalman cnps6500b(s) ユーザーズマニュアル
Installing Fan Bracket
Usage & Caution
1. As shown in Figure 2, the fan and the bracket can be freely placed in any desired
location with the FB123. Therefore, place the fan in an ideal location as shown in
Figure 1. An additional fan can also be placed on the FB123 to maximize the cooling
Figure 1. An additional fan can also be placed on the FB123 to maximize the cooling
of the VGA Card as shown in Figure 3.
2. Using the bolts included, firmly screw the FB123 into the VGA Card slot hole and
the expansion slot hole next to it. Use the appropriate type of bolts for the slot holes.
1. Check the ‘CPU Compatibility’ section and confirm that your CPU is compatible before
using the CPU cooler. When the speed control knob on FAN MATE 1 is turned fully
counter-clockwise, the fan speed is at the minimum and operates in Silent Mode. Turned
counter-clockwise, the fan speed is at the minimum and operates in Silent Mode. Turned
fully clockwise, it operates in Normal Mode. You can select the desired fan speed by
turning the knob.
turning the knob.
Note) FAN MATE 1 has been specifically designed for the fan of this product.
Zalman Tech. Co., Ltd. is not responsible for any damage to systems or CPUs
caused by using it with other types of fans.
2.If a system monitoring program detects the rotation of the CPU fan as being too slow, the
computer may generate an alarm sound and automatically power down. If this happens,
you may turn the speed control knob fully clockwise to increase the fan speed and set
“CPU Fan Detected” to “Disabled” in the BIOS settings, or set the slowest rotation of the
you may turn the speed control knob fully clockwise to increase the fan speed and set
“CPU Fan Detected” to “Disabled” in the BIOS settings, or set the slowest rotation of the
CPU fan in the system monitoring program to less than or equal to 1500RPM.
Note) Some mainboards do not boot if the rotation of the CPU fan is below a certain RPM.
If the BIOS is updated, Silent Mode can be used. For more information on updating
the BIOS, please refer to your mainboard manufacturer’s web site. Even in a case
where the fan RPM is not measured in Silent Mode, performance will not be affected.
the BIOS, please refer to your mainboard manufacturer’s web site. Even in a case
where the fan RPM is not measured in Silent Mode, performance will not be affected.
3. To prevent CPU overheating due to anomalies, set the maximum CPU temperature in the
BIOS setup to 70°C. Zalman Tech. Co., Ltd. is not responsible for damage to a system or
a CPU when the user has not adjusted the temperature as stated above.
Note) Methods in preventing CPU Overheating may differ between mainboards.
Consult your mainboard manufacturer for details.
< Figure 1 >
< Figure 2 >
< Figure 3 >