Intel SR1680MV ユーザーズマニュアル
Intel
®
Server System SR1680MV Service Guide
39
Figure 47. 10 GB IO Card Location
Figure 48 shows the location of the InfiniBand card.
Figure 48. InfiniBand Card Location
Note: Before you remove or install the 10 GB IO card, complete the following steps:
1. Make sure the server is not turned on or connected to the AC power. To power off
the server, see
.
3. Disconnect all necessary cable connections.
Removing the IO Expansion Module
1. Separate guide pins of the module from the holes on the IO Board and lift the
module upward.