Namco Bandai Games 90500085 ユーザーズマニュアル
Page 14
5-2 Connecting the Ski Assy to the Monitor Cabinet.
1.
Connect the connectors between the Ski Assembly and Monitor Cabinet.
2.
Push the Ski Assembly fully up to the monitor cabinet, taking care not to trap
any wires.
any wires.
3.
Fit, finger tight, a joint bracket to each side using 4off Hex Head Set Screws
(M10x25), Spring and Flat Washers on each bracket. Tighten fully all screws.
(Note: Joint Brackets are handed, ensure bracket is fitted with fixing holes
uppermost.)
(M10x25), Spring and Flat Washers on each bracket. Tighten fully all screws.
(Note: Joint Brackets are handed, ensure bracket is fitted with fixing holes
uppermost.)