Namco Bandai Games 90500085 ユーザーズマニュアル
Page 15
2.
Place the assembled Safety Mat into position under the Ski Step Assy.
3.
Retain the Safety Mat in position with the Hex Head Set Screws (M8x20), Spring
Washers and Flat Washers
Washers and Flat Washers
5-3 Fitting the Safety Mat
1.
Assemble the Floor Safety Mat by fitting the securing plates from underneath,
the support brackets from the top and retaining the assembly together with
the M6 Dome Nuts.
the support brackets from the top and retaining the assembly together with
the M6 Dome Nuts.
NOTE:-
When the machine is fully assembled and in its final position, lower the 10 level
adjusters, (4 on the monitor cabinet and 6 on the ski assy), with a spanner so that
all castors are raised from the floor by approximately 5mm, and the machine is
level. Tighten the lock nuts with a spanner to ensure that the level adjusters do not
move.
adjusters, (4 on the monitor cabinet and 6 on the ski assy), with a spanner so that
all castors are raised from the floor by approximately 5mm, and the machine is
level. Tighten the lock nuts with a spanner to ensure that the level adjusters do not
move.
If this machine is installed on a smooth or shiny floor, it is recommended that rubber
slip mats be placed under each adjustable foot to prevent the machine from moving
when being played.
slip mats be placed under each adjustable foot to prevent the machine from moving
when being played.