Namco Bandai Games 90500085 ユーザーズマニュアル

Page 37

1.

Turn the power switch ON

2.

Press the service switch, and start the game.

3.

When the game starts, the restriction plate (see diag.) moves to the
released position.

4.

When the steps are released, turn the power OFF.

5.

To re-lock the steps turn the power ON and the steps will re-lock in the
power up motor check.

The step-lock should be greased every three to four months.

1.

2.

Apply grease to the following locations.

•

Between the restriction plate and guide rails, and between the cam follower.

•

Screw shaft

•

Pillow shaft

•

Sub torsion bar axle

WARNING

Make sure that the power is turned OFF.
If work is to be carried out with the covers removed, take care not to trap
hands or fingers in the mechanism.