Namco Bandai Games 90500127 ユーザーズマニュアル
Page 63
7-3
Replacing the Camera Assy
1.
Remove 2off security screws (M5x12), disconnect the connectors and remove
the Camera assy.
2.
Remove 2off Whizz nuts (M4) and remove the Camera Mounting bracket.
3.
Remove 2off pozi head screw (M2x30), Camera Filter (note which way round this
filter is facing), 2off Spacers and the Camera PCB.
4.
Reasemble in reverse order.
Note: Always reinitialize the guns if the camera has been removed or replaced.
(see 6-2-3-1 page 47)
Security screw (M5x12)
Camera Assy
Connectors
Whizz nut (M4)
Earth connector
Camera mounting bracket
Pozi head screw (M2x30)
CCD Camera
(connector at the bottom)
Connector
Camera filter
(note the direction)