Namco Bandai Games 90500127 ユーザーズマニュアル
Page 64
7-4
Replacing the Sensor
1.
Remove the Camera assy.
(see 7-3 page 63)
2.
Remove 2off pozi head screws (M2.5x14), with flat and spring washers, and
remove the Sensor.
3.
Reassemble in reverse order.
Note: Check the direction of the interruption sensor when reinstalling. If the sensor is
installed facing the wrong way, a message will appear on the screen and the
game cannot start.
Camera unit
Interruption sensor (note direction)
Pozi head screw (M2.5
×
14)
(with flat and spring washers)