Konica Minolta su-501 ph2-5 um 1-1-0 ユーザーズマニュアル

Troubleshooting

bizhub 350/250 (Phase 2.5)

9-7

Remedies for several possible problems are described below.

Transmission is not 
possible.

The connections are incor-
rect.

Check the LED indicator on the hub 
and check the connections.

Since the image data is too 
large, a timeout occurred at 
the receiving end.

• Increase the timeout setting on the 

receiving end.

• Decrease the size of the image data, 

and then try transmitting again.

The settings necessary for the 
device are not registered.

Specify the necessary network set-
tings.

The LAN cable is damaged.

Replace the LAN cable.

IP has been limited with IP fil-
tering.

Check with the administrator of the 
machine.

Other causes

Check the list of transmissions in the 
Job List screen for details of the trans-
mission error, and then refer to the ta-
ble of error codes.