Vulcan Materials vulcan g60 ユーザーズマニュアル

F35425 (October 2005)

Page 10 of 23

ENDURANCE SERIES GAS RANGES - REMOVAL AND REPLACEMENT OF PARTS

WARNING:  DISCONNECT  THE
ELECTRICAL  POWER  TO  THE
MACHINE  AND  FOLLOW  LOCKOUT /
TAGOUT  PROCEDURES.

WARNING:  SHUT  OFF  THE  GAS  BEFORE
SERVICING  THE  UNIT.

WARNING:  ALL GAS  JOINTS  DISTURBED
DURING  SERVICING  MUST  BE  CHECKED  FOR
LEAKS.  CHECK  WITH  A  SOAP  AND  WATER
SOLUTION  (BUBBLES).  DO  NOT  USE  AN
OPEN  FLAME.

The oven burner nozzle is mounted between the
oven gas supply tubing and the u-burner assembly.

1.

Turn off the burners.

2.

Disconnect the unit from gas flow and allow to

cool completely.

3.

Remove the kick plate as outlined under

COVERS AND PANELS.

4.

Remove the burner nozzle.

5.

Check for blockage or damage.

6.

Reverse the procedure to install the burner

nozzle.

WARNING:  DISCONNECT  THE
ELECTRICAL  POWER  TO  THE
MACHINE  AND  FOLLOW  LOCKOUT /
TAGOUT  PROCEDURES.

WARNING:  SHUT  OFF  THE  GAS  BEFORE
SERVICING  THE  UNIT.

WARNING:  ALL  GAS  JOINTS  DISTURBED
DURING  SERVICING  MUST  BE  CHECKED  FOR
LEAKS.  CHECK  WITH  A  SOAP  AND  WATER
SOLUTION  (BUBBLES).  DO  NOT  USE  AN
OPEN  FLAME.

The pilot valve for the griddle burners is mounted on
the gas supply manifold located behind the griddle
control panel.

1.

Remove the oven manifold cover as outlined

under COVERS AND PANELS.

2.

Remove top burner grates and deflector, if

necessary, to access the pilot valve.

3.

Disconnect the pilot tubing from the holder.

4.

Disconnect the holder from the pilot valve.

5.

Remove the pilot valve from the manifold.

6.

Reverse the procedure to install a new pilot

valve.