Vulcan Materials c24ea5 ユーザーズマニュアル

— 10 —

The cooking light indicates that the steamer is in
the cooking cycle.

Set the cooking time (0 to 60 minutes). Steam
cooking will begin when the door is closed. The
cooking cycle will be interrupted if the door is
open during the cooking cycle; resume cooking
by closing the door.

When done, a buzzer sounds and steam stops
being supplied to the cooking chamber. Turn
the timer OFF to stop the buzzer.

WARNING: THE  STEAMER  AND  ITS  PARTS

ARE  HOT.  USE  CARE  WHEN
OPERATING,  CLEANING  OR
SERVICING  THE  STEAMER.  THE
COOKING  COMPARTMENT  CON-
TAINS  LIVE  STEAM.  STAY  CLEAR
WHILE  OPENING  THE  DOOR.

Once the steamer is installed and all mechanical
connections have been made, thoroughly test
the steamer before operation.

1. Check that proper water, drain, and electrical

connections have been made.

2. Open water valve.

3. Push handle in to turn the steamer on. Wait

approximately 15-20 minutes.

4. Open the door and observe that no steam is

entering the compartment.

5. Set the timer to the 5 minute position.  Close

the compartment door. Steam should be
heard entering the compartment. Wait
approximately 2-3 minutes.

6. Check drain line to ensure that water from

the cold-water condensate valve is flowing
through the drain line.

7. Open the compartment door and observe

that steam supply to the compartment stops.

Push the handle in to turn on the steamer. Pull
the handle out to turn off and drain the steamer.

Note: Controls for the Basic and Professional

models are shown in Figure 3.

ON

The boiler will automatically fill and begin
heating to the preset temperature.

OFF The boiler will drain, switch power light

will turn off.

The ready light indicates that the steamer is
ready for the cooking cycle.