Lowrance lmf-400 ユーザーズマニュアル
20
depending on the number of engines chose during Boat Setup. The
options are All Engines, Port, Center, Starboard and Off. The default
setting is All Engines. (If you have a single-engine configuration, the
only options on the Engine Warning menu will be on and off.)
1. Press
1. Press
MENU
, use the
UP
and
DOWN
keys to highlight
S
YSTEM
S
ETUP
,
and press
ENTER
.
2. Highlight
E
NGINE
W
ARNINGS
and press
ENTER
to access the Engine
Warnings menu.
3. Choose the desired option and press
3. Choose the desired option and press
ENTER
. You will be taken back
to the main display. If you choose All Engines, the alarm will be shown
for each alarm that has been set. If Port, Center or Starboard engines
are selected, the gauge will only show warnings coming from the
chosen engine. (To turn off all engine warnings, highlight
O
FF
and press
ENTER
. If you turn off engine alarms, no alarms will be shown for any
of the engines.)
Bus Devices
Bus Devices
The Bus Devices feature allows you to manage devices on the NMEA
2000 network. Accessing devices from the Bus Devices list gives you
access to an EP sensor's internal menu. We will cover that in more
detail in Section 4: EP Configuration and Calibration.
1. Press
1. Press
MENU
, use the
UP
and
DOWN
keys to select
S
YSTEM
S
ETUP
and
press
ENTER
.
2. Highlight
B
US
D
EVICES
and press
ENTER
.
The Bus Devices, a list of
network devices, will appear.
3. Press
3. Press
EXIT
repeatedly to get back to the main display.
Sonar Alarms
Sonar alarms allow you to set alarms that will alert you as water depth
changes around your vessel. If the depth rises above (Deep Alarm) or
falls below (Shallow Alarm) thresholds of your choosing, an alarm will
sound.
To set the Shallow Alarm:
The shallow alarm will sound when your vessel enters water more
To set the Shallow Alarm:
The shallow alarm will sound when your vessel enters water more
shallow than the selected shallow alarm threshold.
1. Press
1. Press
MENU
, use the
UP
and
DOWN
keys to select
S
YSTEM
S
ETUP
and
press
ENTER
.
2. Highlight Sonar Alarms and press
ENTER
to open the Sonar Alarms
menu with two options: Shallow and Deep.
3. Select
S
HALLOW
and press
ENTER
. The Shallow menu will appear with
two options: Off and Set Depth.