Lowrance lmf-400 ユーザーズマニュアル
22
3. Press
ENTER
and the following message will appear: Press Enter to
reset Eng/Tank Cfg.
4. Press
4. Press
ENTER
, which will open the Boat Setup menu. Press
ENTER
,
then use the
UP
and
DOWN
keys to select an engine-tank configuration
that matches the number of engines and tanks on your vessel.
The Boat Setup menu options are: 1 Eng/1 Tank,
The Boat Setup menu options are: 1 Eng/1 Tank,
1 Eng/2 Tank,
2 Eng/1
Tank,
2 Eng/2 Tanks,
3 Eng/1 Tank or 3 Eng/3 Tanks.
5. Select the desired option and press
ENTER
, which will open the Tank
Size menu. The Tank Size men will have up to three options (Port
Tank, Cen Tank, Stbd Tank), depending on the engine tank
configuration you selected during Boat Setup. (If you selected one tank
during Boat Setup, you will not see any of these options. You will be
taken directly to the Setting Tank Size Window.)
6. Select a tank and press
6. Select a tank and press
ENTER
to open the Setting Tank Size
window.
7. Use the
7. Use the
UP
and
DOWN
keys to enter how many gallons the tank will
hold and press
ENTER
. Repeat steps 6 and 7 for each remaining tank.
NOTE:
If you have one tank, press
ENTER
after you have input the capacity
of the tank. Press
EXIT
repeatedly to get back to the main display.
8. After all tanks have been setup, press
EXIT
repeatedly to return to
the main display.
Reset Values:
Reset Values:
The Reset command allows you to reset all values back to factory
default settings.
To reset values:
1. Press
To reset values:
1. Press
MENU
, use the
UP
and
DOWN
keys to select
S
YSTEM
S
ETUP
and
press
ENTER
.
2. Select
R
ESET
V
ALUES
and press
ENTER
. The following message will
appear: Press Enter to Reset All Values.
3. Press
3. Press
ENTER
to reset values. You will be taken back to the main
display.
WARNING:
WARNING:
Resetting values is a hard reset. All LMF-400 settings
will be set back to factory defaults. Resetting values,
however, does not affect engine/tank configuration or
the calibration and configuration settings of devices on
the bus.
will be set back to factory defaults. Resetting values,
however, does not affect engine/tank configuration or
the calibration and configuration settings of devices on
the bus.