Lowrance lmf-400 ユーザーズマニュアル
41
Change Engine (active only with multiple-engine setting)
The steps below show how to switch the configuration name of a fuel
flow from the port engine to the starboard engine.
If all fuel flows configured (Configuration name unavailable):
1. Press
If all fuel flows configured (Configuration name unavailable):
1. Press
MENU
, use the
UP
and
DOWN
keys to select
S
YSTEM
S
ETUP
and
press
ENTER
.
2. Highlight
B
US
D
EVICES
and press
ENTER
. The Bus Devices list will
appear.
3. Select the Port fuel flow and press
3. Select the Port fuel flow and press
ENTER
. Highlight
U
NSET
E
NGINE
and
press
ENTER
. The following message will appear: Press Enter to
UnConfig Device Name.
4. Press
ENTER
. You will be taken back to the Bus Devices list, where
the port fuel flow will now be displayed as UnCfg FFlow.
5. Select the Starboard Fuel Flow and press
5. Select the Starboard Fuel Flow and press
ENTER
.
6. Highlight
C
HANGE
E
NGINE
and press
ENTER
. The Select Engine menu
will appear with up to three options (Port, Center and Starboard),
depending on your engine-tank configuration.
7. Select
7. Select
P
ORT
and press
ENTER
. You will be taken back to the Bus
Devices list.
8. Highlight UnCfg FFlow and press
8. Highlight UnCfg FFlow and press
ENTER
. The following message will
appear: Press Enter to Configure Fuel Flow Sns.
9. Press
9. Press
ENTER
, which will open the Select Engine menu. Choose
Starboard and press
ENTER
. You will be taken back to the Bus Devices
list where the fuel flows will be shown with their new configuration
names.
If desired configuration name available:
1. Press
If desired configuration name available:
1. Press
MENU
, use the
UP
and
DOWN
keys to select
S
YSTEM
S
ETUP
and
press
ENTER
.
2. Highlight
B
US
D
EVICES
and press
ENTER
. The Bus Devices list will
appear.
3. Select the fuel flow you want to reconfigure and press
3. Select the fuel flow you want to reconfigure and press
ENTER
.
Highlight
C
HANGE
E
NGINE
and press
ENTER
. The Select Engine menu will
appear with up to three options (Port, Center or Starboard), depending
on your engine-tank configuration.
4. Choose the desired configuration name and press
4. Choose the desired configuration name and press
ENTER
. You will be
taken back to the Bus Devices list, where the fuel flow you reconfigured
will be displayed with its new configuration name.
Fuel Wrng (Fuel Warning)
Fuel Warning allows you to set a Low level or High level alarm for each
fuel flow on the network. A pop-up window will appear if your fuel rises
above or falls below a threshold of your choosing.