Lowrance lmf-400 ユーザーズマニュアル

ページ / 72
42 
1. Press 
MENU
, use the 
UP
 and 
DOWN
  keys  to  select 
S
YSTEM 
S
ETUP
 and 
press 
ENTER
2. Highlight 
B
US 
D
EVICES
 and press 
ENTER 
to open the Bus Devices list. 
3. Select the desired fuel flow and press 
ENTER
, which will open the 
Fuel Flow menu.  
4. Highlight 
F
UEL 
W
RNG
 and press 
ENTER
. The Select Level menu will 
appear with two options: Low Level and High Level.
 
Typically, a Fuel 
Level warning is used to alert you when your vessel is running low on 
fuel, so highlight 
L
OW 
L
EVEL
 and press 
ENTER
. The Set Level Percentage 
window will appear, allowing you to set the level warning to the 
desired percentage of tank capacity. It will be set to 
O
FF
 by default. (To 
turn off a level warning select Off.) 
5. Use the 
UP
 and 
DOWN
 keys to set the desired fuel warning 
percentage and press 
ENTER
. You will be taken back to the Bus Devices 
list. 
Reset Values:
  
By accessing the Reset Values command from the Fuel Flow menu, you 
will be able to reset configuration and calibration settings for a 
particular fuel flow.  
1. Press 
MENU
, use the 
UP
 and 
DOWN
  keys  to  select 
S
YSTEM 
S
ETUP
 and 
press 
ENTER
.  
2. Highlight 
B
US 
D
EVICES
 and press 
ENTER
. Select the fuel flow you want 
to reset and press 
ENTER
.  
3. Choose 
R
ESET 
V
ALUES 
from the fuel flow menu and press 
ENTER
. The 
following message will appear: Press Enter to Reset Device Values.  
4. Press 
ENTER
 and you will be taken back to the Bus Devices list, 
where the fuel flow will now be displayed as UnCfg F Flow. 
NOTE: 
By resetting values from the configuration menu, ONLY the device 
selected from the Bus Devices list will be set back to its defaults. 
When you Reset Values, the calibration and configuration settings 
of the device are set back to factory defaults.  
EP-15 Fluid Level Configuration 
The LMF-400 will support up to three tanks for each Fluid Level type 
which includes: Fuel, Fresh Water, Oil, Black Water, Waste Water 
(Gray Water) and Live Well.  
On the Bus Devices list, the fuel tanks will be displayed as Fuel Tank 
(P) — Port Fuel Tank (C) — Center, and Fuel Tank (S) —Starboard. If 
you chose a one-tank configuration in Boat Setup, the tank will be 
listed as Fuel Tank.