jetway 875pmaxr2a ユーザーズマニュアル
64
FastBuild ™ Utility 2.00 2002-2005 Promise Technology, Inc.
Array No RAID Mode Total Drv Capacity Status
Array 1 Mirror/Stripe 4 7999 Critical
Array 2 ---- ---- ---- ----
Array 3 ---- ---- ---- ----
Array 4 ---- ---- ---- ----
Array 2 ---- ---- ---- ----
Array 3 ---- ---- ---- ----
Array 4 ---- ---- ---- ----
[↑] Up [↓] Down [ESC] Exit [Enter] Select
7. Select the replacement drive. Press <Enter>.
FastBuild ™ Utility 2.00 2002-2005 Promise Technology, Inc.
Array No RAID Mode Total Drv Status
Array 1 Mirror/Stripe 4 Critical
Stripe Block: not Available Gigabyte Boundary: On
Array 1 Mirror/Stripe 4 Critical
Stripe Block: not Available Gigabyte Boundary: On
Channel: ID drive Model Capacity (MB)
3:Mas FUJITSU MPD3043AT 4325
[↑] Up [↓] Down [ESC] Exit [Enter] Select
8. Confirm the command to copy data from the intact source hard disk
onto a new replacement hard disk. A progress gauge displays the
copy progress for the duration of the task.
copy progress for the duration of the task.
9. After the rebuild processis complete, the user is prompted to reboot the
system.
Controller Configuration (6): This command shows the default for Controller
Configuration. The default value is [Enabled].
Configuration. The default value is [Enabled].
[Key Available]
[Select Drive for Rebuild]
[View Array Definition Menu]
[Rebuild array Menu]
[Keys Available]