jetway 875pmaxr2a 사용자 설명서

FastBuild ™ Utility 2.00  2002-2005 Promise Technology, Inc.

Array No RAID Mode Total Drv Capacity Status

Array 1 Mirror/Stripe 4           7999     Critical
Array 2 ----            ----         ----     ----
Array 3 ----            ----         ----     ----
Array 4 ----            ----         ----     ----

[↑] Up [↓] Down [ESC] Exit [Enter] Select

7. Select the replacement drive. Press <Enter>.

FastBuild ™ Utility 2.00  2002-2005 Promise Technology, Inc.

Array No RAID Mode     Total Drv           Status

Array 1 Mirror/Stripe 4                    Critical

Stripe Block: not Available        Gigabyte Boundary: On

Channel: ID drive Model Capacity (MB)

3:Mas FUJITSU MPD3043AT 4325

[↑] Up [↓] Down [ESC] Exit [Enter] Select

8. Confirm the command to copy data from the intact source hard disk

onto a new replacement hard disk. A progress gauge displays the
copy progress for the duration of the task.

9. After the rebuild processis complete, the user is prompted to reboot the

system.

Controller Configuration (6): This command shows the default for Controller
Configuration. The default value is [Enabled].

[Key Available]

[Select Drive for Rebuild]

[View Array Definition Menu]

[Rebuild array Menu]

[Keys Available]