opcode studio 4 ユーザーズマニュアル
PART 1: Overview and Installation
12
Opcode Systems, Inc.
Figure 3.3 illustrates a common single
port connection.
port connection.
Figure 3.3: Single (Modem) Port Connection
Figure 3.3 uses only the Macintosh
Modem port for communicating with the
Studio 4. One external peripheral (such as
a printer) can be connected directly to the
Macintosh Printer port. You can connect
an additional external peripheral (such as
a modem) to the “A THRU” jack on the
Studio 4 and switch it in or out from the
front panel.
Modem port for communicating with the
Studio 4. One external peripheral (such as
a printer) can be connected directly to the
Macintosh Printer port. You can connect
an additional external peripheral (such as
a modem) to the “A THRU” jack on the
Studio 4 and switch it in or out from the
front panel.
Dual Port Connection
Use a dual port connection if you need
increased MIDI “throughput” (for exam-
ple, your MIDI data is densely packed
with notes, continuous controls, System
Exclusive messages and MIDI Time
Code). It’s a good idea to always use a
dual port connection when you’re syn-
chronizing MIDI playback with SMPTE
timecode.
increased MIDI “throughput” (for exam-
ple, your MIDI data is densely packed
with notes, continuous controls, System
Exclusive messages and MIDI Time
Code). It’s a good idea to always use a
dual port connection when you’re syn-
chronizing MIDI playback with SMPTE
timecode.
You may connect the Studio 4’s “A” port
to either Macintosh serial port. Similarly,
you may connect the “B” port to either the
Modem or Printer port.
to either Macintosh serial port. Similarly,
you may connect the “B” port to either the
Modem or Printer port.
Figure 3.4 illustrates a common dual port
connection. Connect both Macintosh
serial ports to the Studio 4, and attach any
connection. Connect both Macintosh
serial ports to the Studio 4, and attach any
external peripherals to the Studio 4 THRU
jacks. You can switch between the
Studio 4 and the external peripherals by
using the corresponding THRU switch on
the front panel.
jacks. You can switch between the
Studio 4 and the external peripherals by
using the corresponding THRU switch on
the front panel.
Figure 3.4: Dual Port Connection
NOTE:
In a two cable system, such as
shown in Figure 3.4, use the Network Rout-
ing window to distribute data between ports
(see Chapter 6).
ing window to distribute data between ports
(see Chapter 6).
Connecting Two Macintosh
Computers
Computers
Two Macintosh computers may share one
Studio 4 by connecting one Macintosh to
the Studio 4 “A” port and connecting the
other Macintosh to the Studio 4 “B” port.
Studio 4 by connecting one Macintosh to
the Studio 4 “A” port and connecting the
other Macintosh to the Studio 4 “B” port.
Figure 3.5: Two Macs Sharing One Studio 4
You can also connect two Studio 4’s to two
Macintosh computers as shown in
Figure 3.6. This is an example of a
Studio 4 network. Networking connec-
tions are discussed in the next section.
Macintosh computers as shown in
Figure 3.6. This is an example of a
Studio 4 network. Networking connec-
tions are discussed in the next section.
OUT
SMPTE
IN
PORT B
PORT A
B
THRU
A
THRU
9VDC
MACINTOSH
8-pin mini-DIN cable
(supplied)
Optional cable to peripheral
Optional cable
to peripheral
Studio 4
Optional cables to peripherals
OUT
SMPTE
IN
PORT B
PORT A
B
THRU
A
THRU
9VDC
MACINTOSH
8-pin mini-DIN cables
(supplied)
(supplied)
Studio 4
OUT
MIDI OUT
MIDI IN
SMPTE
IN
PORT B
PORT A
B
THRU
A
THRU
9VDC
8
16
7
15
6
14
5
13
4
12
3
11
2
10
1
9
6
14
5
13
4
12
3
11
2
10
1
9
MACINTOSH
MACINTOSH