kvh 01027702bk install ユーザーズマニュアル

2.

Insert a nut bar into each of the metal mounting
plates so that the nut bar is held suspended
between the mounting plate arms. Ensure the nut
bar swivels easily within the mounting plate. 

3.

Lift the skirt on the four rubber mounting blocks,
then place the blocks onto the mounting plates.
Align with the threaded holes in the nut bar. 

If you are mounting the antenna directly to the roof,
follow the steps below.  

1.

Attach each of the four mounting brackets to the
antenna base using two 

1

⁄

4

"-20 x 

3

⁄

4

" hex socket

screws. (A bolt is factory-installed in the base between
the bracket holes.)

54-0350

TracVision A7 Installation Guide

Bracket

Factory-installed bolt

1/4"-20 x 3/4" Hex Socket 
Screws 

(with Nylok patch) 

Nut Bar

Mounting
Plate

Mounting
Block

Nut Bar

Skirt