Pentax Optio S10 操作ガイド

8

Very occasionally, static electricity may cause camera malfunction. In 

this case, remove the battery and install it again. If the camera is then 

working properly, normal condition is restored and you can continue 

using the camera.

The subject is 
not in focus

The subject is difficult to 
focus on

The camera may have difficulty in 

focusing on such subjects as: low-contrast 

subjects (a white wall, a blue sky, etc.), 

dark subjects, finely-patterned objects, 

rapidly-moving objects. It is also difficult to 

get proper focus when shooting through a 

window or a net. Try shooting using the 

focus lock (p.32) or Manual Focus (p.88).

The subject is not in the 
focusing area

Locate the desired subject in the focus 

frame J (focusing area) in the center of 

the LCD monitor. If it is difficult to do so, 

first lock the focus on the desired subject 

(focus lock), and then move the camera to 

recompose. (p.32)

The subject is too close Set the focus mode to q (Macro) or 

r 

(Super  Macro). (p.87)

The focus mode is set to 
q

 (Macro) or r (Super  

Macro)

Normal pictures will be out of focus if 
taken with the focus mode set to 
q

 (Macro) or r (Super  Macro).

The flash does 
not discharge

The flash mode is set to 
Off

Set the flash mode to Auto or b. (p.90)

The Capture mode is set 
to C (Movie) mode, 
Continuous Shooting, 
Infinity,  

(Sport) mode, 

or 

E

 (Pet) mode 

The flash will not discharge in these 
modes. You can cancel the non-flash 
setting in   (Sport) mode and E (Pet) 
mode.

The USB 
Connection 
with a personal 
computer does 
not function 
properly.

The USB Connection 
setting of the camera is 
set to PictBridge.

Set the USB Connection setting to PC. 
(p.178)

The USB 

Connection 

with a printer 

does not 

function 

properly.

The USB Connection 
setting of the camera is 
set to PC.

Set the USB Connection setting to 
PictBridge. (p.178)

e_kb448.book  Page 194  Monday, August 6, 2007  10:27 AM