Panasonic KXMB2001GX 操作ガイド
Feature/Code
Selection
Setting the recording paper
type for manual input tray
MBNM3NM8NM4N
type for manual input tray
MBNM3NM8NM4N
M1N “PLAIN PAPER” (default): 75 g/m
2
to 90 g/m
2
paper.
M2N “THIN PAPER”: 64 g/m
2
to 75 g/m
2
paper.
Note:
R This setting will be deactivated when printing from a computer. To set the
R This setting will be deactivated when printing from a computer. To set the
Setting the waiting time for
the power save mode
MBNM4NM0NM3N
the power save mode
MBNM4NM0NM3N
To set the length of time before the unit enters power save mode.
M1N “1min” (default): 1 minute
M2N “5min”: 5 minutes
M3N “15min”: 15 minutes
M4N “30min”: 30 minutes
M5N “1h”: 1 hour
M1N “1min” (default): 1 minute
M2N “5min”: 5 minutes
M3N “15min”: 15 minutes
M4N “30min”: 30 minutes
M5N “1h”: 1 hour
Note:
R When in power save mode, the unit needs to preheat the fuser unit before
R When in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.
Holding the previous contrast
setting
MBNM4NM6NM2N
setting
MBNM4NM6NM2N
M0N “DISABLED” (default): Deactivates this feature.
M1N “ENABLED”: The unit will hold the previous setting.
M1N “ENABLED”: The unit will hold the previous setting.
Note:
R The previous setting will be held individually for copying.
R The previous setting will be held individually for copying.
Viewing the counter for
departments
MBNM4NM7NM9N
departments
MBNM4NM7NM9N
Setting toner save feature
MBNM4NM8NM2N
MBNM4NM8NM2N
M0N “OFF” (default): Deactivates this feature.
M1N “ON”: The toner cartridge will last longer.
M1N “ON”: The toner cartridge will last longer.
Note:
R This feature may lower the print quality by reducing toner consumption.
R This setting is valid for copying, and when the unit prints reports/lists.
R This feature may lower the print quality by reducing toner consumption.
R This setting is valid for copying, and when the unit prints reports/lists.
40
6. Programmable Features