Panasonic KX-TG7645 操作ガイド

– 3 –

You can use the unit to make or answer calls using a cellular line. Your cellular 
phones must be Bluetooth

®

 wireless technology compatible with this product. For 

more details, please visit our Web site: http://www.panasonic.com/link2cell
L

Locate your cellular phone near the base unit. If the cellular phone is too close to 
the base unit during a cellular call, you may hear noise. For best performance, we 
recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) 
away from the base unit.

Handset:
For CELL 1: {MENU} (6241
For CELL 2: {MENU} (6242
L

After the CELL 1 or CELL 2 indicator on the base unit starts flashing red, the rest 
of the procedure must be completed within 5 minutes.

Your cellular phone:
While the CELL 1 or CELL 2 indicator is flashing red, follow the instructions of your 
cellular phone to enter the registration mode.
L

Depending on your cellular phone, it may ask you to enter the base unit PIN 
(default: “0000”).

Handset:
Wait until a long beep sounds.
L

It may take more than 10 seconds to complete registration.

L

When the CELL 1 or CELL 2 indicator lights green, the cellular phone is 
connected to the base unit. You are ready to make cellular calls.

To select which unit receives calls for  the cellular line (default: “All”):
{

OK} s {r}: Select the desired handset or “All”. s {SAVE}

L

If not required, go to step 5.

{

OFF}

Note:
L

Make sure that your cellular phone is set to connect to this product automatically. 
Refer to your cellular phone’s operating instructions.

Trademarks
L

The Bluetooth

®

 word mark and logos are owned by the Bluetooth SIG, Inc. and any 

use of such marks by Panasonic Corporation is under license. All other trademarks 
identified herein are the property of their respective owners.

Cellular line

service provider

Cellular phone

TG76xx_(e)_QG.fm  Page 3  Tuesday, December 14, 2010  8:38 PM