Panasonic KX-HNS101 操作ガイド
Part names and
functions
n
Sensor unit
n
Magnet unit
D
B
C
A
E
E
Sensor unit cover
M
M
N
Used to confirm the status of the
sensor or register the sensor to
the hub.
LED indicator
Magnet unit cover
“ ” marks
Used to align the sensor and the
magnet unit when installing them
(page 11).
sensor or register the sensor to
the hub.
LED indicator
Magnet unit cover
“ ” marks
Used to align the sensor and the
magnet unit when installing them
(page 11).
LED indicator
You can press M
N and check the
LED indicator to confirm the sensor’s
status.
After confirming the sensor’s status, we
recommend turning the LED indicator
off by pressing M
status.
After confirming the sensor’s status, we
recommend turning the LED indicator
off by pressing M
N again as soon
as possible, otherwise battery life may
be reduced.
be reduced.
Indicator
Status
Green, lit
Window/door is closed
Red, lit
Window/door is open
Red,
blinking
blinking
Sensor is out of range
of the hub
of the hub
Green,
blinking
slowly
blinking
slowly
Registration mode
(You pressed and held
M
(You pressed and held
M
N)
Off
No battery power
Note:
R The LED indicator does not indicate
R The LED indicator does not indicate
sensor status if the sensor has not
been registered (page 9).
been registered (page 9).
Setup overview
1
Initial setup
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide included with your
hub.
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide included with your
hub.
2
Insert the battery
The window/door sensor is battery
powered.
The window/door sensor is battery
powered.
8
For assistance, please visit http://shop.panasonic.com/support
Setup
HNS101_(en_en)_0120_ver201.pdf 8
2017/01/23 15:42:24