Panasonic KXTGE475 操作ガイド
1
Press MMENUN while talking.
2
MbN: “Equalizer” a MSELECTN
3
MbN: Select the desired setting.
4
Press MOKN to exit.
Note:
R The setting you made is kept for each line
R The setting you made is kept for each line
(landline and cellular lines).
R Depending on the condition and quality of
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
R This feature is not available while using the
speakerphone.
R When both the “Equalizer” setting and
noise reduction are activated,
is
shown on the display.
Call share
You can join an existing outside call.
n
n
While another unit is on a cellular call:
1
To join the conversation, press
MCELLN.
R You can join the conversation in the
MCELLN.
R You can join the conversation in the
following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make
– Only 1 cellular phone is paired.
– A specific line is set to make
cellular calls (page 20).
2
MbN: Select the corresponding cellular
phone. a MSELECTN
phone. a MSELECTN
n
While another unit is on a landline call:
To join the conversation, press M
To join the conversation, press M
N.
Note:
R A maximum of 3 parties (including 1 outside
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 44).
sharing mode off (page 44).
Transferring calls, conference
calls
calls
Outside calls can be transferred or a
conference call with an outside party can be
made:
– between 2 handsets
conference call with an outside party can be
made:
– between 2 handsets
– between a handset and the base unit
*1 KX-TGE470 series: page 4
1
During an outside call, press MMENUN.
2
MbN: “Intercom” a MSELECTN
3
MbN: Select the desired unit. a MSELECTN
R If you select “Voice paging”, the
R If you select “Voice paging”, the
call will be switched from the
ear-receiver mode to the
speakerphone mode.
ear-receiver mode to the
speakerphone mode.
4
Wait for the paged party to answer.
R If the paged party does not answer,
R If the paged party does not answer,
press MBACKN to return to the outside
call.
call.
5
To complete the transfer:
Press MOFFN.
To establish a conference call:
MMENUN a MbN: “Conference” a
MSELECTN
R To leave the conference, press MOFFN.
Press MOFFN.
To establish a conference call:
MMENUN a MbN: “Conference” a
MSELECTN
R To leave the conference, press MOFFN.
The other 2 parties can continue the
conversation.
conversation.
R To put the outside call on hold:
MMENUN a MbN: “Hold” a
MSELECTN
To resume the conference: MMENUN
a MbN: “Conference” a MSELECTN
MSELECTN
To resume the conference: MMENUN
a MbN: “Conference” a MSELECTN
R To cancel the conference: MMENUN a
MbN: “Stop conference” a
MSELECTN
You can continue the conversation
with the outside caller.
MSELECTN
You can continue the conversation
with the outside caller.
Transferring a cellular call
between the handset and a
cellular phone
between the handset and a
cellular phone
Transferring a cellular call from the
handset to a cellular phone
handset to a cellular phone
1
Press MMENUN during a cellular call.
2
MbN: “Transfer to cell” a
MSELECTN
R The cellular call is transferred to the
MSELECTN
R The cellular call is transferred to the
cellular phone.
Note:
R Depending on your cellular phone type, you
R Depending on your cellular phone type, you
may need to set the cellular phone to be
24
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Handset
TGE46x47x(en)_1117_ver061.pdf 24
2015/11/17 15:14:13