Panasonic KXTG6424E 操作ガイド

39

If the unit detects a problem, one of the following messages is shown on the display.

*1 KX-TG6421/KX-TG6422/KX-TG6423/KX-TG6424

L

The supplied telephone line cord has not been 
connected yet or not connected properly. Check the 
connections (page 10).

L

Recording was too short. Try again.

L

Phonebook copy failed (page 19). Confirm the other 
handset (the receiver) is in standby mode and try 
again.

L

The receiver’s phonebook memory is full. Erase the 
unnecessary phonebook entries from the other 
handset (the receiver) and try again.

L

The phonebook memory is full. Erase unnecessary 
entries (page 18).

L

Message memory is full. Erase unnecessary 
messages (page 30).

L

The call barred list memory is full. Erase unnecessary 
entries (page 23).

L

The handset has lost communication with the base 
unit. Move closer to the base unit and try again.

L

Unplug the base unit’s AC adaptor to reset the unit. 
Reconnect the adaptor and try again.

L

The handset’s registration may have been cancelled. 
Re-register the handset (page 23).

L

A wrong type of battery such as Alkaline or 
Manganese was inserted. Use only the rechargeable 
Ni-MH battery noted on page 4, 7.

L

You must subscribe to a Caller ID service. Once you 
receive caller information after subscribing to a Caller 
ID service, this message will not be displayed. 

TG6411-6421E(e).book  Page 39  Tuesday, December 16, 2008  7:54 AM