Panasonic NVSV121EP 取り扱いマニュアル

AC IN~

Antenna

        RF IN
    Antenna input

       RF OUT
  Antenna output

Antenna input

RF coaxial cable

AC mains lead

AC mains lead

Connect antenna to the
RF IN (Antenna input) 
connector of the VCR.

Connect the VCR´s RF OUT

(Antenna output) to the 
television set’s antenna in 
connector.

Connect VCR and television 
set to the  AC mains supply.

Disconnect power to
all devices.

You can connect the VCR to your TV set 
by using a RF coaxial cable.

D

Mind that a wrong date or time will influence the programmed 
recording of TV programmes (don't forget to change summer time and 
winter time).

D

If the Country menu does not 
appear after turning the device on, 
you may reset the device to its 
factory defaults (page 17). Upon 
doing so the VCR Auto Setup will 
start again.

The Country menu appears.

!

With the arrow buttons  

 select the according country, and 

confirm with 

ENTER.

Automatic tuning for all receivable TV stations begins. 
Approximate duration is 5 minutes.

If menu Clock set appears
If time and date are not transmitted by a TV station or you choose 
Russia from the Country menu, time and date must be set manually.

!

Enter Time and Date with  

  

 

or 

        ... 

 , then 

save with 

ENTER.

After running the automatic tuning Time and Date must be set 
manually.

!

Enter Time and Date with  

  

 

or 

        ... 

 , then 

save with 

ENTER.

(Automatic tuning)