Panasonic NVSV121EP 取り扱いマニュアル

AC mains lead

Antenna

        RF IN
Antenna input

           AV1 
21-pin Scart socket

       RF OUT

Antenna output

AC mains lead

Antenna input

RF coaxial cable

21-pin
Scart cable

AC IN~

Disconnect power to
all devices.

Connect antenna to the 
RF IN (Antenna input) 
connector of the VCR.

Connect the VCR’s  RF OUT

(Antenna output) to the 
television set’s antenna input 
connector.

Connect the VCR’s AV1 socket
(21-pin Scart socket) to the TV 
set’s Scart In socket.

Connect VCR and TV set to 
the AC mains supply.

!

Turn on your television set.

!

With the 

Stand-by/on switch turn on the VCR. 

The Country menu appears.

!

With the arrow buttons  

 select the according country, and 

confirm by pressing 

ENTER.

Automatic tuning for all receivable TV stations begins. 
Approximate duration is 5 minutes.  

If menu Clock set appears
If time and date are not transmitted by a TV station or you choose 
Russia from the Country menu, time and date must be set manually.

!

Enter Time and Date with  

  

 

or 

        ... 

 , then 

save with 

ENTER.

After running the automatic tuning Time and Date must be set 
manually.

!

Enter Time and Date with  

  

 

or 

        ... 

 , then 

save with 

ENTER.

D

Mind that a wrong date or time will influence the programmed 
recording of TV programmes (don't forget to change summer time 
and winter time).

D

If the Country menu does not 
appear after turning the device 
on, you may reset the device to 
its factory defaults (page 17). 
Upon doing so the VCR Auto 
Setup will start again.

(

)

Automatic tuning