Panasonic RPSDW64GE1K 操作ガイド

Hold the case with both hands when opening and closing it to 
prevent damage to the card.

Slide the card on the tray when removing and storing it. Ensure 
the card is correctly placed on the tray before closing the case.

You can write notes directly onto this card with a 
pen, etc.
≥ Do not use excessive force as it may damage 

the card. Take care not to stain the metal 
terminals.

≥ Use a pencil or similar to write on the reverse 

side of the card, and not writing instruments with 
a hard tip, such as a ballpoint pen.

≥ Switch the write-protect switch a to 

“LOCK”. Unlock when you want to record or 
edit the card again.

≥ While data is being read or written, do not 

remove the card or turn off any equipment 
using the card. Do not remove the batteries 
from battery-operated equipment. These 
actions can cause data to be destroyed.

≥ Make backup copies of your data wherever possible. 

Panasonic will not accept responsibility for any data loss, or 
loss directly or indirectly caused by data loss.

≥ When a reformatting is required, format with compatible 

equipment or use the dedicated formatting software. You may 
have a problem with the compatibility or performance when it is 
formatted with the formatting software that is included in your 
PC. For the dedicated formatting software, see the Panasonic 
Web Site.
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html

≥ Do not disassemble or modify the card.
≥ Do not impact, bend, drop, or wet.
≥ Do not touch the metal terminals with your hands or metal 

objects.

≥ Do not detach the label on the card.
≥ Do not attach other labels or stickers.

≥ Do not use or store this card in a location subjected to static 

electricity or electrical noise. If the host device does not operate 
normally due to the effects of static electricity on the card, then 
remove the card from the host device and insert it again.

≥ After using the card, store it in a commercially available card 

case with anti-static electricity treatment, or similar.

≥ Do not place it inside a car that may become very hot, or places 

that will get very hot, such as under direct sunlight.

≥ Do not use or store in humid or dusty locations.
≥ Do not use or store in locations exposed to corrosive gases.

“

” represents Class 10 of the speed specification 

regarding continuous writing between SDXC compatible 
equipment and SDXC memory cards (SD Speed Class), 
specified by the SD Standards. If the SDXC compatible 
equipment is compatible with the SD Speed Class, and 
recommends the Class 10 card, you will have stable recording 
operation using this card.

≥ SDXC compatible equipment may contain the functions 

“Format” and “Erase”. However, in most cases all data on the 
card will not be completely erased even after performing these 
functions. When disposing or transferring ownership of the 
card, we recommend using Panasonic formatting software 
(http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html) 
to completely erase all data from the card.

≥ When you dispose of the SDXC memory card, destroy it 

physically or erase all data completely and follow your local 
rules of separation and disposal of waste.

LOCK



≥ SDXC Logo is a trademark of SD-3C, LLC.
≥ Microsoft

®

, Windows

®

, Windows

®

 98, Windows

®

 Me, 

Windows

®

 2000, Windows

®

 XP, Windows Vista

®

 and 

Windows

®

 7 are either registered trademarks or trademarks 

of the Microsoft Corporation in the United States and/or 
other countries.

≥ Apple, Mac OS is either registered trademarks or 

trademarks of Apple Inc. in the United States and/or other 
countries.

≥ Other names of systems and products mentioned in these 

instructions are usually the registered trademarks or 
trademarks of the manufacturers who developed the system 
or product concerned.

RP-SDW_E2.book  3 ページ  ２０１０年３月１７日　水曜日　午前９時６分