Canon EOS 5D Mark IV L-series Zoom Lens Kit オーナーマニュアル

555

Troubleshooting Guide

 

If the power is turned off while an image is being recorded to the 
card, the access lamp will remain on or continue to blink for a few 
seconds. When the image recording is completed, the power will 
turn off automatically.

 

Do not use any battery other than genuine Canon Battery Pack 
LP-E6N/LP-E6.

 

Remove and install the battery again (p.44).

 

If the electrical contacts are dirty, use a soft cloth to clean them.

 

Use a fully-charged battery (p.42).

 

The battery performance may have degraded. See [53: Battery 
info.] to check the battery’s recharge performance level (p.526). If 
the battery performance is poor, replace the battery with a new 
one.

 

The number of possible shots will decrease with any of the 
following operations:
• Pressing the shutter button halfway for a prolonged period.
• Activating the AF frequently without taking a picture.
• Using the lens’s Image Stabilizer.
• Using GPS.
• Using the LCD monitor frequently.
• Continuing Live View shooting or movie shooting for a prolonged 

period.

• Using the Wi-Fi/NFC (wireless communication) function 

frequently.

• The Eye-Fi card’s transmission is enabled.

The access lamp still lights or blinks even when 
the power switch is <2>.