JL Audio Stealthbox® オーナーマニュアル
Continued on Next Page
SB-B-X5E70/10W3v3 INSTR_SKU# 011324
Page 3 • JL Audio, Inc 2011
S T E P 1 4
Cut the Foam Tape into three 4” strips, affix them to the new
Battery Cover, and trim away the excess, as shown.
Cut the Foam Tape into three 4” strips, affix them to the new
Battery Cover, and trim away the excess, as shown.
C O N G R A T U L A T I O N S !
You have completed the installation for this model!
Enjoy your new Stealthbox®!
Please refer to the Power Recommendation section for an
amplifier recommendation and basic set-up help.
amplifier recommendation and basic set-up help.
S T E P 1 5
Secure the Battery Cover using the three #8 x 1” Screws.
Secure the Battery Cover using the three #8 x 1” Screws.
S T E P 1 3
Secure the Top Bracket to the Stealthbox® and to the rail
using a pair of 1/4” - 20 x 1” Bolts, 1/4” Lock Washers, and 1/4”
Flat Washers.
Secure the Top Bracket to the Stealthbox® and to the rail
using a pair of 1/4” - 20 x 1” Bolts, 1/4” Lock Washers, and 1/4”
Flat Washers.
S T E P 1 2
Slide a U-Nut over the factory hole in the rail, as shown.
Slide a U-Nut over the factory hole in the rail, as shown.