DJI Phantom 3 Standard (Factory Refurbished) オーナーマニュアル

Aircraft

Phantom 3 Standard

User Manual

Attaching the Propellers

1. Remove the warning stickers from the motors before attaching the propellers.

2. Attach the black propeller nuts onto the motors with black dots and spin them counter-clockwise to

secure. Attach the silver propeller nuts onto the motors without black dots and spin them clockwise to

secure.

Flight Data

The aircraft automatically keeps a record of detailed flight data including telemetry measurements,

aircraft status information, and error messages. To export this data, connect the aircraft to the PC

through the Micro USB port and launch the DJI GO app to export this data. This data can be later

analyzed with the proper software if necessary.

Attaching and Detaching the Propellers

Only use official DJI Phantom 3 propellers with your Phantom 3 Standard.

Propellers

Silver Propeller Nut

Black Propeller Nut

Figure

Attach On

Motors without a black dot

Motors with a black dot

Legends

Lock : Turn the propellers in this direction to secure.

Unlock : Turn the propellers in this direction to loosen.

20米

Aircraft cannot return to the Home Point when GPS signal is weak
( [

] displays grey) or unavailable.

20米

if you move the throttle stick after the aircraft rises above 65 feet

(20m) but below the pre-set Failsafe RTH altitude, the aircraft will stop

ascending and immediately return to the Home Point.