DJI Phantom 4 Advanced Quadcopter オーナーマニュアル

Remote Controller

©

 2017 DJI All Rights Reserved. 

Remote Controller Profile

The Phantom 4 Advanced / Advanced+ remote controller is a multi-function wireless 

communication device that integrates the video downlink system and the aircraft remote control 

system, which operate at 2.4 GHz. The remote controller features a number of camera control 

functions, including photo/video capture as well as gimbal control. The battery level is displayed 

via LED indicators on the front panel of the remote controller.

 

Compliance Version: The remote controller is compliant with local compliance and regulations. 

 

Operating Mode: Control can be set to Mode 1 or Mode 2, or to a custom mode. 

 

Mode 1: The right stick serves as the throttle.

 

Mode 2: The left stick serves as the throttle.

To prevent transmission interference, do not operate more than three aircrafts in the same area.

Using the Remote Controller

Turning the Remote Controller On and Off 

The Phantom 4 Advanced / Advanced+ remote controller is powered by a 2S rechargeable battery 

that has a capacity of 6000 mAh. The battery level is indicated via the Battery Level LEDs on the front 

panel. Follow the steps below to turn on your remote controller:

1. When the remote controller is turned off, press the Power Button once. The Battery Level LEDs will 

display the current battery level.

2.  Press and hold the Power Button to turn on the remote controller.

3.  The remote controller will beep when it is turned on. The Status LED will rapidly blink green, indicating 

that the remote controller is linking to the aircraft. The Status LEDs will glow solid green when linking is 

complete.

4.  Repeat Step 2 to turn off the remote controller. 

Charging the Remote Controller

Charge the remote controller using the included charger. Refer to the figure on next page below for more 

details.