Sony STR-DN1080 オーナーマニュアル
42
GB
Enjoying Sound and
Video
Video
You can connect AV devices to the receiver to
enjoy a wide range of content such as movies
and audio.
Also, you can listen to FM broadcasts in high-
quality sound through the built-in tuner.
enjoy a wide range of content such as movies
and audio.
Also, you can listen to FM broadcasts in high-
quality sound through the built-in tuner.
1
Turn on the device you want to
play.
play.
2
Turn on the receiver.
3
Turn the TV on, and then switch
the input of the TV to the input
to which the receiver is
connected.
the input of the TV to the input
to which the receiver is
connected.
4
Press HOME.
The home menu is displayed on the TV
screen.
Depending on the TV, the home menu
may take some time to appear on the TV
screen.
screen.
Depending on the TV, the home menu
may take some time to appear on the TV
screen.
5
Press / to select [Watch] or
[Listen], then press
[Listen], then press
.
The menu item list appears on the TV
screen.
screen.
6
Select the device you want to
play and start playback.
play and start playback.
When you select [FM TUNER], tune in to
your desired station by using the buttons
on the remote control according to the
guide on the TV screen. For details on
operation, visit the Help Guide.
your desired station by using the buttons
on the remote control according to the
guide on the TV screen. For details on
operation, visit the Help Guide.
7
Press
+/– to adjust the
volume.
You can also use MASTER VOLUME on
the receiver.
the receiver.
Before you turn off the receiver, be sure to turn
down the volume level to avoid damaging your
speakers the next time you turn on the receiver.
down the volume level to avoid damaging your
speakers the next time you turn on the receiver.
You can turn INPUT SELECTOR on the receiver or
press the input buttons on the remote control to
select the device you want.
press the input buttons on the remote control to
select the device you want.
To turn the volume up or down quickly
Turn the MASTER VOLUME knob quickly.
Press and hold one of the
+/– buttons.
To make fine adjustments
Turn the MASTER VOLUME knob slowly.
Press one of the
+/– buttons and release it
immediately.
You can select a HDMI signal format
according to video signals from devices
connected to the HDMI IN jacks.
according to video signals from devices
connected to the HDMI IN jacks.
1
Press HOME, then select
[Setup] – [HDMI Settings] –
[HDMI Signal Format].
[Setup] – [HDMI Settings] –
[HDMI Signal Format].
2
Select the format you want.
[Standard format]: Selects this when
you do not use high bandwidth video
format.
you do not use high bandwidth video
format.
[Enhanced format]: Selects this when
you use high bandwidth video formats
such as 4K/60p 4:4:4, 4:2:2 and 4K/
60p 4:2:0 10 bit.
you use high bandwidth video formats
such as 4K/60p 4:4:4, 4:2:2 and 4K/
60p 4:2:0 10 bit.
For details on the high bandwidth video format,
visit the Help Guide.
visit the Help Guide.
Listening/Watching
Playing AV devices/Listening to
FM radio
FM radio
Watch
Select the video source connected to the receiver.
Watch
Listen
Custom
Preset
Sound
E ff e c t s
Setup
Zone
Controls
Note
Tip
Setting HDMI signal format
Note