Sony STR-DN1080 オーナーマニュアル
43
GB
List
enin
g/
W
a
W
a
tc
h
ing
When [Enhanced format] is selected, we
recommend you to use a Premium High Speed
HDMI Cable with Ethernet, which can support
bandwidth up to 18 Gbps.
recommend you to use a Premium High Speed
HDMI Cable with Ethernet, which can support
bandwidth up to 18 Gbps.
Some devices (cable box or satellite box, Blu-ray
Disc player, and DVD player) does not work well
with [Enhanced format] setting. In this case, select
[Standard format].
Disc player, and DVD player) does not work well
with [Enhanced format] setting. In this case, select
[Standard format].
If your TV have similar menu for high bandwidth
video format, check the setting on the TV menu
when you select [Enhanced format] on this
receiver. For details on the TV menu setting, refer
to the operating instructions of the TV.
video format, check the setting on the TV menu
when you select [Enhanced format] on this
receiver. For details on the TV menu setting, refer
to the operating instructions of the TV.
Since the HDMI IN VIDEO 1 jack does not support
video formats such as 4K/60p 4:4:4, 4:2:2 and 4K/
60p 4:2:0 10 bit, you cannot set the HDMI signal
format.
video formats such as 4K/60p 4:4:4, 4:2:2 and 4K/
60p 4:2:0 10 bit, you cannot set the HDMI signal
format.
1
Connect the speakers located
in Zone 2 (page 25).
in Zone 2 (page 25).
2
Turn on the receiver.
3
For USA and Canadian models:
Set the priority for speaker
terminals.
Set the priority for speaker
terminals.
Press HOME, then select [Setup] –
[Speaker Settings] – [SURROUND BACK/
ZONE2 Priority] – [ZONE2 Terminals].
[Speaker Settings] – [SURROUND BACK/
ZONE2 Priority] – [ZONE2 Terminals].
For other models:
Select a speaker pattern, and
set the assignment for the
speaker terminals.
Select a speaker pattern, and
set the assignment for the
speaker terminals.
Press HOME, then select [Setup] –
[Speaker Settings] – [Speaker
Pattern].
Pattern].
Select a speaker pattern without
surround back speakers, and then
select [Save].
select [Save].
Select [Surround Back Speaker
Assign] –[Zone2].
4
Press HOME, then select [Zone
Controls].
Controls].
5
Set [Zone2] – [Zone2 Power] –
[On].
[On].
You can also press ZONE SELECT on the
receiver repeatedly to select
“ZONE2 ON ?”, then press ZONE POWER
on the receiver to set.
receiver repeatedly to select
“ZONE2 ON ?”, then press ZONE POWER
on the receiver to set.
6
Select [Zone2 Input], then
select the source signals you
want to output.
select the source signals you
want to output.
You can also turn INPUT SELECTOR on the
receiver while “2. xxxx”* appears on the
display panel.
receiver while “2. xxxx”* appears on the
display panel.
If you want to listen to the same sound as main
zone in Zone 2, select [SOURCE].
zone in Zone 2, select [SOURCE].
7
Start playback on the selected
input device.
input device.
8
Select [Zone2 Volume], then
adjust the volume.
adjust the volume.
You can also turn MASTER VOLUME on
the receiver while “2. xxxx”* appears on
the display panel.
the receiver while “2. xxxx”* appears on
the display panel.
* “xxxx” is the input name.
To exit zone operation
Set [Zone2 Power] to [Off] in step 5.
Only audio signals from [USB], [Bluetooth] (only
when [Bluetooth Mode] is set to [Receiver]), [Home
Network], [Music Service List], and [FM TUNER] and
audio signals input from AUDIO IN jacks located on
the rear panel of the receiver are output to the
Zone 2 speakers.
when [Bluetooth Mode] is set to [Receiver]), [Home
Network], [Music Service List], and [FM TUNER] and
audio signals input from AUDIO IN jacks located on
the rear panel of the receiver are output to the
Zone 2 speakers.
External digital input from OPTICAL IN, COAXIAL IN
and HDMI IN jacks cannot be output to Zone 2.
and HDMI IN jacks cannot be output to Zone 2.
If you set [DSD Native] in [Audio Settings] to [On],
no audio signals for DSD content from [USB] or
[Home Network] are output to the Zone 2 speakers.
no audio signals for DSD content from [USB] or
[Home Network] are output to the Zone 2 speakers.
Enjoying sound from speakers
located in other rooms (Zone 2)
located in other rooms (Zone 2)
Tip
Note