PreSonus FaderPort™ 8 オーナーマニュアル

25

To engage Channel Focus, press Sends twice. In this mode, the 
following four parameters are available for Send Slots 1 and 2: 

 

• Send Destination. Use the Fader to select the Bus. Press the Pan/Param 

encoder to commit the Bus selection. Fader 1 controls this parameter 
for Insert Slot 1. Fader 5 controls this parameter for Insert Slot 2.

 

• Send Level. Use the Fader to control the Send level. Fader 2 control 

Insert Slot 1’s send level. Fader 6 controls Insert Slot 2’s send level.

 

• Send Pre/Post selection. Use the Fader to switch between 

pre- and post-fader send positions. Fader 3 sets this position for 
Insert Slot 1. Fader 7 sets this position for Insert Slot 2.

 

• Send Active/Mute. Use Faders 4 and 8 to enable / disable 

the send for Insert Slot 1 and 2 respectively.

4.7 

1.  Audio / Inputs. Press to view Audio tracks only. Press 

Shift + Audio to view all Input channels.

2.  VI. Press to view Instrument tracks only. MIDI view is not available in Logic.
3.  Bus / Outputs. Press to view busses only. Press 

Shift + Bus to view Output channels.

4.  VCA / FX. There is no VCA view in Logic, however VCA’s can be viewed when 

either “All” or “Outputs” is active. Press Shift + VCA to view all Effects channels.

5.  All / User. Press to view all channels. User view is not available in Logic.