PreSonus FaderPort™ 8 オーナーマニュアル

27

Once you have connected your FaderPort 8 to your computer, launch 
Live to set up the FaderPort 8 as a Mackie Control Universal device:

1.  Go to Options | Preferences
2.  Choose the Link MIDI tab and set the Control Surface to Mackie 

Control and the Input and Output to “FaderPort 8.”

3.  Make sure that Track, Sync, and Remote are all enabled for 

both the Input and the Output of “MackieControl.”

4.  Close the Preferences window. 

Your FaderPort 8 is now set up and ready to use. Enjoy!

5.2 

1.  Channel Name and Level. Displays the Channel name and current fader level.
2.  Metering. Displays the channel metering. This can be turned on or off by 

pressing SHIFT plus the push button encoder in the Session Navigator.

3.  Pan Position. Displays the Channel’s current pan position. 
4.  Pan/Param. This push-button encoder controls the pan of 

the currently selected channel while in Track mode. 

5.  Select Button. This button selects the corresponding 

channel in your DAW application. While selected, several 
editing functions are available. See Section 5.2.2.

6.  Solo. Isolates the corresponding channel’s output signal in the mix.
7.  Mute. Mutes the corresponding channel’s output signal.
8.  Touch-Sensitive Fader. This 100 mm motorized fader can be used to control 

volume levels, aux send levels, panning, or plug-in parameters, depending on 
mode. See Section 5.6 for more information. 
 
 
 
 
 
 
 
 
 

5.2.1 

Arm. Pressing the Arm button will allow you to arm track for recording by pressing 
the corresponding track’s Select button. 
 

Arm All. Press Shift + Arm to arm the eight currently focused tracks for recording.