Zvox SoundBar SB500 オーナーマニュアル

The SB400 and SB500 have adjustments 
that could prove useful, depending on the 
installation location and user preferences. 
The adjustments are made through the PS  
Menu feature of both soundbars. 

For instance, your TV set may not have a 
provision to turn off the internal speakers 
or the TV may display a distracting “TV 
speakers off” message. Adjustments to the 
PS menu of the soundbar along with your 
preferred remote control can allow your 
remote control to adjust volume on the 
soundbar without your TV speaker playing 
or the distracting message.

These adjustments are made using the four 
end panel buttons on the soundbar while 
watching the numeric display. The remote 
control provided with the SB400 and SB500 
cannot make adjustments to the PS Menu.

®

To make a selection from the PS menu listing, 
press and hold down both the MUTE and 
VOLUME UP front panel buttons for about  
3 seconds. If this is the first time you 
have used the PS menu, you will see the 
characters “PS-0” start flashing. Immediately 
release the two buttons when you see the 
PS number flashing. Then quickly press and 
release the Volume Up button while “PS” is 
still flashing. This will increase PS number 
setting. Pressing Volume Down will decrease 
the PS number setting, down to “PS-0”. 
Each time you press the Volume Up or 
Volume Down button, you have an additional 
six seconds to make an adjustment.

Once you arrive at your intended PS number, 
just wait for the display to stop flashing the 
PS number. When the flashing stops, the 
adjustment is made.

ZVOX Soundbar Adjustment Options SB400/SB500