Zvox SoundBar SB500 사용자 매뉴얼
The PS Menu
The SB400 and SB500 have adjustments
that could prove useful, depending on the
installation location and user preferences.
The adjustments are made through the PS
Menu feature of both soundbars.
that could prove useful, depending on the
installation location and user preferences.
The adjustments are made through the PS
Menu feature of both soundbars.
For instance, your TV set may not have a
provision to turn off the internal speakers
or the TV may display a distracting “TV
speakers off” message. Adjustments to the
PS menu of the soundbar along with your
preferred remote control can allow your
remote control to adjust volume on the
soundbar without your TV speaker playing
or the distracting message.
provision to turn off the internal speakers
or the TV may display a distracting “TV
speakers off” message. Adjustments to the
PS menu of the soundbar along with your
preferred remote control can allow your
remote control to adjust volume on the
soundbar without your TV speaker playing
or the distracting message.
These adjustments are made using the four
end panel buttons on the soundbar while
watching the numeric display. The remote
control provided with the SB400 and SB500
cannot make adjustments to the PS Menu.
end panel buttons on the soundbar while
watching the numeric display. The remote
control provided with the SB400 and SB500
cannot make adjustments to the PS Menu.
Press both buttons for three or more
seconds to trigger the PS number
adjustment mode.
(866) 367-9869 | info@zvoxaudio.com
®
Adjusting the PS Menu
To make a selection from the PS menu listing,
press and hold down both the MUTE and
VOLUME UP front panel buttons for about
3 seconds. If this is the first time you
have used the PS menu, you will see the
characters “PS-0” start flashing. Immediately
release the two buttons when you see the
PS number flashing. Then quickly press and
release the Volume Up button while “PS” is
still flashing. This will increase PS number
setting. Pressing Volume Down will decrease
the PS number setting, down to “PS-0”.
Each time you press the Volume Up or
Volume Down button, you have an additional
six seconds to make an adjustment.
press and hold down both the MUTE and
VOLUME UP front panel buttons for about
3 seconds. If this is the first time you
have used the PS menu, you will see the
characters “PS-0” start flashing. Immediately
release the two buttons when you see the
PS number flashing. Then quickly press and
release the Volume Up button while “PS” is
still flashing. This will increase PS number
setting. Pressing Volume Down will decrease
the PS number setting, down to “PS-0”.
Each time you press the Volume Up or
Volume Down button, you have an additional
six seconds to make an adjustment.
Once you arrive at your intended PS number,
just wait for the display to stop flashing the
PS number. When the flashing stops, the
adjustment is made.
just wait for the display to stop flashing the
PS number. When the flashing stops, the
adjustment is made.
While flashing, the Volume Up or Down
buttons set the PS number. After adjustment,
the setting is stored when the display turns off.
ZVOX Soundbar Adjustment Options SB400/SB500