Samsung HT-J5500W オーナーマニュアル

 - English

Settings

 

The Home menu will not appear if you do not 
configure the initial settings.

 

The OSD (On Screen Display) may change in 
this product after you upgrade the software 
version.

 

The access steps may differ depending on the 
menu you selected.

1.  Turn on your TV after connecting the product, 

and then turn on the product. When you turn 
on the product for the first time, the product 
automatically displays the Setup Language 

screen.

2.  Press the ▲▼ buttons to select the desired 

language, and then press the v button. 

3.  Press the v button to start function setup.

Setup

TV Aspect and Network will be set. 
Each setting may be changed later under "Settings"

a Previous      " Select

Start

4.  The Tv Aspect Ratio screen appears. Press the 

▲▼ buttons to select a TV aspect ratio, and 
then press the v button. 
You have four choices: 
16:9 Original - For widescreen TVs. Displays 

widescreen pictures in their original 16:9 format 
and 4:3 pictures (the old, standard format) in 
4:3 pillar box format with black bars on the left 
and right. 
16:9 Full - For widescreen TVs. Displays 

widescreen pictures in their original 16:9 format 
and expands 4:3 pictures to fill the 16:9 screen. 
4:3 Letter Box - For older, standard screen, 

analog TVs. Displays 4:3 pictures in full screen 
and 16:9 pictures in letter box format that 
retains the 16:9 aspect ratio but puts black bars 
above and below the picture. 
 

4:3 pan-Scan - For older, standard screen, 

analog TVs. Displays 4:3 pictures in full screen 
and 16:9 pictures in Pan-Scan format that fills 
the screen, but cuts off the left and right sides 
of the picture and enlarges the middle vertically.

5.  The Network screen appears.

 

- Before you begin, confirm that the product is 

connected to your router.

 

- Set to wired or wireless depending on your 

network environment.

 

- If your wireless network has a security code, 

you will need to enter the code to complete 
the network connection.

 

- If you have a network with static IP addresses, 

we suggest you select Skip by pressing the 

 button.

 

✎

If you skip network setup here or the setup 
does not work correctly, you can set up the 
product's network connection later. (See page 
20)

Setup | Network

Select your network type.

Network Type

Network cable connected.

Wireless

Wired

Connect

a Previous      d Skip      m Move      " Select

6.  The product verifies the network connection 

and then connects to the network. When it is 
done, press the v button. The "Initial settings 
completed." screen appears, and then the 

Home screen appears.

 

✎

If you want to display the Setup screen again 
and make changes, select the Reset option. 

 

✎

If you use an HDMI cable to connect the 
product to an Anynet+ (HDMI-CEC)-compliant 
Samsung TV and 1.) You have set the Anynet+ 
(HdMI-CEC) feature to On in both the TV 

and the product and 2.) You have set the 
TV to a language supported by the product, 
the product will select that language as the 
preferred language automatically.