McIntosh MCT450 オーナーマニュアル
10
Connections using Digital DIN Output
Connections using Digital DIN Output
The MCT450 Digital Audio DIN Output Con-
nector outputs PCM and SACD Digital Disc Signals
when connected to a compatible McIntosh Preampli-
fier. Power Control provides the ability to be remotely
switched On/Off from a McIntosh Preamplifier or
A/V Control Center via the Power Control connection.
when connected to a compatible McIntosh Preampli-
fier. Power Control provides the ability to be remotely
switched On/Off from a McIntosh Preamplifier or
A/V Control Center via the Power Control connection.
The MCT450 Data Port Connection allows for
the remote operation of basic functions using the
Preamplifier Remote Control. When the MCT450
is used with a McIntosh D150 Digital Preamplifier,
the Remote Control supplied with the D150 will also
control the basic MCT450 transport functions. With
an external sensor connected to the MCT450, remote
control operation is possible from another room and/
or when the MCT450 is located in a cabinet with the
doors closed.
Preamplifier Remote Control. When the MCT450
is used with a McIntosh D150 Digital Preamplifier,
the Remote Control supplied with the D150 will also
control the basic MCT450 transport functions. With
an external sensor connected to the MCT450, remote
control operation is possible from another room and/
or when the MCT450 is located in a cabinet with the
doors closed.
The connection instructions below, together with
the MCT450 Connection Diagram located on the
separate folded sheet “Mc1A, is an example of a typi-
cal audio system. Your system may vary from this,
however the actual components would be connected in
a similar manner. For additional information refer to
“Connector and Cable Information” on page 4.
Power Control Connections:
separate folded sheet “Mc1A, is an example of a typi-
cal audio system. Your system may vary from this,
however the actual components would be connected in
a similar manner. For additional information refer to
“Connector and Cable Information” on page 4.
Power Control Connections:
1. Connect a Control Cable from the Preamplifier
3RZHU&RQWURORU&175/-DFNWRWKH32:(5
&21752/,1-DFNRQWKH0F,QWRVK0&7
SACD/CD Transport.
&21752/,1-DFNRQWKH0F,QWRVK0&7
SACD/CD Transport.
2. Optionally, connect a Control Cable from the
MCT450 SACD/CD Transport POWER CON-
752/287-DFNWRDGGLWLRQDO0F,QWRVKFRPSR-
QHQWVZLWK3RZHU&RQWURO,Q-DFN
752/287-DFNWRDGGLWLRQDO0F,QWRVKFRPSR-
QHQWVZLWK3RZHU&RQWURO,Q-DFN
Data Control Connections:
3. When a connection on the Preamplifier is avail-
able, connect a Control Cable from the Preampli-
ILHU&''DWD3RUW-DFNWRWKH0F,QWRVK0&7
6$&'&'7UDQVSRUW'$7$,1-DFN
6$&'&'7UDQVSRUW'$7$,1-DFN
6HQVRU&RQQHFWLRQV
4. Optionally, connect an IR Sensor to the McIntosh
0&76$&'&'7UDQVSRUW,5,1-DFN
Digital Audio Connections:
5. Connect the supplied Digital DIN Cable from the
McIntosh MCT450 SACD/CD Transport DIGI-
TAL AUDIO OUTPUT DIN connector to the
Digital DIN Input Connector on the on the Pream-
plifier.
TAL AUDIO OUTPUT DIN connector to the
Digital DIN Input Connector on the on the Pream-
plifier.
Note: When the Digital DIN Output Connection
between the MCT450 and Digital DIN Audio
Input on a Pramplifier is used, no additional
Digital Audio Connections are necessary.
The Digital DIN Connection is for all types
of disc based Digital Signals.
Input on a Pramplifier is used, no additional
Digital Audio Connections are necessary.
The Digital DIN Connection is for all types
of disc based Digital Signals.
AC Power Cords Connections:
6. Connect the McIntosh MCT450 SACD/CD Trans-
port AC Power Cord to a live AC outlet.