Exakta DC-2100 ユーザーガイド
- 70 -
E
Formatting erases all images currently recorded on the SmartMedia™ card loaded on your camera. Protected
images are also erased. The SmartMedia™ card cannot be formatted if it is write-protected.
images are also erased. The SmartMedia™ card cannot be formatted if it is write-protected.
IMPORTANT
• The SmartMedia™ card must be formatted on the camera before use.
1. Set the mode dial to
,
or
.
When
is selected, the last image frame appears on the LCD monitor.
2. Hold down the
erase button for two seconds.
The ERASE menu is displayed.
3. Use the
or
buttons to select FORMAT
1
.
Make sure that [FORMAT] is displayed in yellow at the bottom right of
the screen.
the screen.
4. Use the
or
buttons to select YES
2
, and press
the ENTER button.
To cancel formatting, select NO, and press the ENTER button.
5. To reset the image number, use the
or
buttons to
select YES, and press the ENTER button.
To cancel resetting of image numbers, select NO, and press the
ENTER button.
ENTER button.
Formatting the SmartMedia™ Card
ERASE
FRAME
ALL
FORMAT
YES
100
0004
NO
2
1