Comp X Security Products Inc 421860 ユーザーズマニュアル
TIRE REPLACEMENT
Inspection
Harley-Davidson tires are equipped with wear bars that
run horizontally across the tread.When wear bars become
visible and only 1/32 in. (0.8 mm) tread depth remains,
replace tire immediately. Using a worn tire can adversely
affect stability and handling, which could result in death
or serious injury. Use only Harley-Davidson approved
replacement tires. (00090b)
run horizontally across the tread.When wear bars become
visible and only 1/32 in. (0.8 mm) tread depth remains,
replace tire immediately. Using a worn tire can adversely
affect stability and handling, which could result in death
or serious injury. Use only Harley-Davidson approved
replacement tires. (00090b)
See Figure 56. Arrows on tire sidewalls pinpoint location of
wear bar indicators.
wear bar indicators.
Tread wear indicator bars will appear on tire tread surfaces
when 1/32 in. (0.8 mm) or less of tire tread remains. See
Figure 57. Always replace tires before the tread wear indicator
bars appear.
when 1/32 in. (0.8 mm) or less of tire tread remains. See
Figure 57. Always replace tires before the tread wear indicator
bars appear.
When To Replace Tires
New tires are needed if any of the following conditions exist:
1.
Tread wear indicator bars become visible on the tread
surfaces.
surfaces.
2.
Tire cords or fabric become visible through cracked side-
walls, snags or deep cuts.
walls, snags or deep cuts.
3.
A bump, bulge or split in the tire.
4.
Puncture, cut or other damage to the tire that cannot be
repaired.
repaired.
160 Maintenance and Lubrication