Comp X Security Products Inc 421860 ユーザーズマニュアル

ページ / 117
1.
Check spark plug type. Only use those spark plugs speci-
fied for your model motorcycle.
2.
Check spark plug gap against table specifications.
3.
Always tighten to the proper torque. Spark plugs must be
tightened to the torque specified for proper heat transfer.
NOTE
If a torque wrench is not available, tighten plugs finger tight
and then tighten an additional one quarter turn with a spark
plug wrench.
IGNITION
The engine in your motorcycle has been designed specifically
to achieve optimum fuel economy within exhaust emission
controls. Factory programmed ignition characteristics provide
maximum engine performance and driveability.
AIR CLEANER
See Figure 58. The engine air cleaner is a paper/wire mesh
air filter element.
Refer to Table 32. Remove air cleaner cover and inspect filter
element at proper intervals. Under dusty conditions, inspect
more often.
The paper/wire mesh air filter element should be washed in
luke warm water with a mild detergent.
Compressed air can pierce the skin and flying debris from
compressed air could cause serious eye injury. Wear
safety glasses when working with compressed air. Never
use your hand to check for air leaks or to determine air
flow rates. (00061a)
Allow filter to either air dry or blow it dry, from the inside,
with low pressure air.
Do not use an air cleaner filter oil on the Harley-Davidson
paper/wire mesh air filter element.
Install air filter before running engine. Failure to do so can
draw debris into the engine and could result in engine
damage. (00207a)
Maintenance and Lubrication   163