Exegin Technologies Limited Q53 ユーザーズマニュアル

Q53 Installation and Configuration Guide © Exegin Technologies Limited, 2009

viii. Reference Information
Complete Command Reference

List commands

These commands list the current or working settings for a particular section within the
command line interface shell. To view stored settings in Flash memory, you’ll need to
add "

stored

" to the beginning of any of the following commands. For example, "

list

net

" shows you the current network settings but "

list stored net

" shows you the

settings sitting in Flash. Normally these should match. You may also type "

list

default

" to view the factory default settings.

Table 4—List Command Options

Command Syntax

Description

list all

List all current settings.

list diff

List the differences between the current
settings and the stored settings in Flash.
Normally, you want these values to match,
so issue a "

save

" command followed by a

restart

list date

List the current time and date on the Q53.

list dhcp

Display the current status of the DHCP
client in the Q53. Data includes the client
state, server IP address, and the length of the
current lease.

list [default|stored] ifc

Display the module’s physical network
interface properties. There is one interface
parameter (mode) which denotes the
operating mode of the network interface’s
physical layer:

mode auto - the Q53 will automatically
negotiate link speed and duplex with the link
peer.

mode 10half - the network interface is
forced to 10 MB/Sec, half duplex mode.

mode 10full - the network interface is
forced to 10 MB/Sec, full duplex mode.

mode 100half - the network interface is
forced to 100 MB/Sec, half duplex mode.

mode 100full - the network interface is
forced to 10 MB/Sec, full duplex mode.

list [default|stored] key

List the license details and license key
number.

list [default|stored] net

List all current TCP/IP network settings
(e.g. IP address and subnet mask).