K-Mark Industrial Limited. UBC-CO1-ACC-R1 ユーザーズマニュアル

Instruction Manual

Ultrasonic sound frequencies are outside the range of human 

hearing. However, dogs can hear ultrasonic sound which is 

attention grabbing and irritating to dogs. Ultrasonic sound has 

been used for over a century to safely and humanely train dogs.

BarkWise™ vibrates in response to your dog’s barking. This cre-

ates a slight annoyance and takes the dog’s focus off of barking.

Bad habits are sometimes hard to break. While some dogs may take 

longer, most will start taking to the training within two weeks.

There are currently no restrictions for what size of dogs the 

BarkWise can be used. However, the collar strap can fit dogs 

with a neck size of 6” up to 24”.

Absolutely. Unlike other training collars such as shock,  

BarkWise™ uses safe and humane technology to curb your  

dog’s barking.

BarkWise™ detects barking with an internal microphone and 

responds by emitting combinations of ultrasonic or audible 

sound and vibration. The combinations create an irritating  

sensation that disrupts barking. After a short training period, 

your dog will begin associating his barking with this  

annoyance and learn to be quiet. It’s completely safe and  

humane bark control.

The BarkWise™ comes with a charger. Simply plug this into the 

collar and plug the adapter into an outlet. The blue LED light 

will indicate that BarkWise™ is charging. The red LED flashes 

when BarkWise™ needs charging (charge time is approx. 2hrs). 

The power button is located on the top of the unit. Power it ON 

by pressing and holding the button for 3 seconds. The unit will 

beep 3X with a flashing blue light.  BarkWise™ is now activated.  

Power OFF by pressing and holding the button for 3 seconds. It 

will beep 1 time and the red light will flash.

•  Blue LED Indicator: primary indicator light that is emitted 

at various operational settings of the unit, e.g. vibration, 

ultrasonic, and audible. 

•  Red LED Indictor: enabled during the power OFF stage of 

the unit

BarkWise™ bark control device

Nylon dog collar

Remote control

Please use a CE or EN 60950 approved adapter for charging. The adapter output should be DC 5.5V, 0.5A.